Friday, May 31, 2013
I have a new tutorial for you today using Amy Marie's kit O Spring. This kit is gorgeous! Very versatile! You can get the kit at SATC
*Click Tag For Full Image*
What you will need
Tube of Choice- I am using a tube by Jessica Dougherty which I purchased from CILM
Mask Of Choice I used a mask by Wee Scott Lass
This tutorial was written by me, Natalie, on May 31st 2013. This tutorial is of my own creation. Any similarities is just a coincidence.
You must have a working knowledge of PSP. I use PSP 9 but I'm sure any other version will work as well.
Remember to save often.
Ready? Let's do this!
Open new image 600x600
transparent background
Copy and paste Element 26. Resize to your liking. Add drop shadow.
Copy/ Paste tube of your choice, move to the left of your frame.
Open Paper 14- Copy/paste and move to under the frame. Using your magic wand click inside the frame, selection, modify by 5. Invert delete paper 14.
Duplicate tube, put inside of frame just like you did your paper. Lower opacity to 60.
Open Element 41. Resize to liking. Add drop shadow. Move over to left side. Duplicate and move to the right side.
Open, Copy/paste element 12. Resize to your liking. Add drop shadow. Place in the lower right corner.
Duplicate, mirror, and move to left corner, in front of the tube.
Open, copy/paste element 11. Resize, add drop shadow, and place by element 12. See tag for placement. Duplicate, and move to the left side.
Open, copy/paste element 29. Resize to your liking. move to the bottom of the tag, place in the middle. Make sure it's the very top layer. Duplicate twice, move those to the very bottom layer, and move one to the right side, and one to the left side.
Open, copy/paste element 47. Resize to your liking. Add drop shadow. Move to bottom layer. Move to bottom left corner. Look at tag for reference.
Duplicate, mirror, and move to the left side of the tag so it looks the same on both sides.
Open copy/paste element 50. Resize, add drop shadow. Place in front of the leaves you just placed. See tag for reference.
Duplicate, and move to the left side again, so it matches the right side.
Open paper 14 again, copy/paste and move all the way to the bottom layer. Open your choice of mask. go to layer> New Mask Layer> From Image. Click the down arrow and choose your mask image. Click OK. Delete mask layer, and then merge group.
Add copyright and name and you are done.
Thank you for trying my tutorial!
Monday, May 20, 2013
Today I have 2 CT tags, some snags, and a cluster frame freebie for you all!
I have the amazing opportunity to CT for Jackie from Jackie's Jewels! These kits are fantabulous!
The kit I worked with is called Summer Hideaway.
Please visit Jackie's blog HERE to see where she sells!
First up I have this wonderful tag using the artwork of Alex Prihodko. You must have a license to use his artwork. You can purchase his artwork and a license at PFD.
Please enjoy the snags, and leave some love if you snag!
The extras!
Next I have a tag made using the cluster frame freebie.
Download Cluster Frame Freebie HERE
Today I have a tutorial for a tag I made using Amy Marie's kit Strawberry Dreams. I have joined her CT team on a trial basis to see if I can handle writing tutorials. Please be patient as I am REALLY rusty in writing tutorials.
PTU Strawberry Dreams by Amy Marie
*Click on image for full size*
This tutorial was written by me, on May 20, 2013. These ideas are mine and any likeness is just a coincidence.
You must have a working knowledge of PSP. I use PSP 9 but other versions should work as well. Remember to save often!
Today I am using the Artwork of Ellie Milk which you must have a license to use. You can obtain this license at PFD
I am using the PTU scrapkit by Amy Marie called Strawberry Dreams. You can purchase this kit at PFD or SATC
You will need: Mask of choice and Plugin Xero-Porcelain
Lets get to it!!
Open New Image 600x600- make sure transparent is checked.
Open Element 77, copy/paste as new layer. Image resize 70%>Image rotate> free rotate left 30.00
Click inside of frame using magic wand tool > Selection, modify 6.
Open paper 11 > Copy/Paste as new layer, Selection, invert, delete. Move under frame layer.
Select the frame back layer- Selection, select all, float, defloat
Copy and past your tube of choice > Selection, invert, delete. Lower opacity to 70. Apply Xero- Porcelain with these settings:
Click on the layer for the frame back- Effects, texture effects, blinds and use these settings:
Open element 57, copy/paste as new layer. Move layer to top, resize 70%, add drop shadow, move over to right side of frame.
Duplicate layer > mirror and move down just a little bit. See tag for reference.
Open element 8, copy/paste as new layer resize 70% , add drop shadow, move to bottom of frame.
Open element 67 copy/paste as new layer. Resize to your liking. Duplicate 3 times resizing each to what you like. I did 2 smaller flowers and medium size flowers. Place where you like or see my tag for reference.
Copy and paste your tube of choice and place over on the right side of the frame. Position where you want and add drop shadow.
Open Element 127 copy/paste as new layer, resize 70% and place just underneath your outside tube layer.
Open Element 49 copy/paste as new layer, resize by 70% 3 times. Place in lower left hand corner. Add drop shadow.
Open Element 50 copy/paste as new layer, image > mirror. Move underneath element 49. Resize by 70% 3 times. Add drop shadow. See my tag for reference.
Open Element 43, copy/paste as new layer. Resize 70% 3 times. Add drop shadow. Place near bottom of tag. Again, use my tag as a reference.
Open paper 11 copy and paste as new layer. Move down to second to last layer.
Open mask of your choice and minimize. Make sure paper layer is highlighted. Layers > new mask layer > from Image- click arrow and select your mask image, click ok. Delete mask layer, merge group.
Add copyright and name. I used the font Contribute.
That's It! All Done! Thanks for trying my tutorial.
PTU Strawberry Dreams by Amy Marie
This tutorial was written by me, on May 20, 2013. These ideas are mine and any likeness is just a coincidence.
You must have a working knowledge of PSP. I use PSP 9 but other versions should work as well. Remember to save often!
Today I am using the Artwork of Ellie Milk which you must have a license to use. You can obtain this license at PFD
I am using the PTU scrapkit by Amy Marie called Strawberry Dreams. You can purchase this kit at PFD or SATC
You will need: Mask of choice and Plugin Xero-Porcelain
Lets get to it!!
Open New Image 600x600- make sure transparent is checked.
Open Element 77, copy/paste as new layer. Image resize 70%>Image rotate> free rotate left 30.00
Click inside of frame using magic wand tool > Selection, modify 6.
Open paper 11 > Copy/Paste as new layer, Selection, invert, delete. Move under frame layer.
Select the frame back layer- Selection, select all, float, defloat
Copy and past your tube of choice > Selection, invert, delete. Lower opacity to 70. Apply Xero- Porcelain with these settings:
Open element 57, copy/paste as new layer. Move layer to top, resize 70%, add drop shadow, move over to right side of frame.
Duplicate layer > mirror and move down just a little bit. See tag for reference.
Open element 8, copy/paste as new layer resize 70% , add drop shadow, move to bottom of frame.
Open element 67 copy/paste as new layer. Resize to your liking. Duplicate 3 times resizing each to what you like. I did 2 smaller flowers and medium size flowers. Place where you like or see my tag for reference.
Copy and paste your tube of choice and place over on the right side of the frame. Position where you want and add drop shadow.
Open Element 127 copy/paste as new layer, resize 70% and place just underneath your outside tube layer.
Open Element 49 copy/paste as new layer, resize by 70% 3 times. Place in lower left hand corner. Add drop shadow.
Open Element 50 copy/paste as new layer, image > mirror. Move underneath element 49. Resize by 70% 3 times. Add drop shadow. See my tag for reference.
Open Element 43, copy/paste as new layer. Resize 70% 3 times. Add drop shadow. Place near bottom of tag. Again, use my tag as a reference.
Open paper 11 copy and paste as new layer. Move down to second to last layer.
Open mask of your choice and minimize. Make sure paper layer is highlighted. Layers > new mask layer > from Image- click arrow and select your mask image, click ok. Delete mask layer, merge group.
Add copyright and name. I used the font Contribute.
That's It! All Done! Thanks for trying my tutorial.
Subscribe to:
Posts
(Atom)
Grab My Blinkie
Proud Mod
I CT For
Awesome Blogs
